Belt conveyor
- Horizontal with wheels for easy relocation
- Low height
- Bi-directional belt
- Belt with knobs for gradient over 15 degrees.
- Fully automatic
- Reliable
- Easy installation and maintenance
Belt without knobs is recommended when used with a gradient of less than 15 degrees.
Belt with knobs is recommended when used with a gradient of between 15 and 35 degrees.
Rotation monitoring
A sensor monitors the rotation of the end roller to detect slipping, and stops the system if installed in automatic systems.
Conveyor 600
Conveyor 600 is delivered with start modul, end module and middle module. The middle module can be cut to fit the installation. Conveyor 600 can be delivered in lengths up to 50 meters.
Belt without knobs is recommended when used with a gradient of less than 15 degrees. Belt with knobs is recommended when used with a gradient of between 15 and 35 degrees.
TECHNICAL DETAILS
Conveyor 600
Length, drive module | 543 mm |
Length, mid section | 1 500 or 3 000 mm (installed) |
Length, end section | 360 mm |
Width | 1 019 mm |
Height | 386 mm |
Width, belt | 600 mm |
Effect, motor | 2,2 kW |
Rotational Speed | 1 450 rpm |
Gear | 1:7 |
Belt Speed | 106m/min |
See user manual for more information
Legs
When mounted on legs, the Conveyor 600 may be used for elevation. The legs are delivered in lengths of 1,5 and 3 meters.
Wheels
Wheels can be mounted for easy relocation if the Conveyor 600 is used horizontally.