MaxiFeeder & MaxiMag

Modular magazine with the possibility of a high capacity cutter module developed by Serigstad.

MaxiMag and MaxiFeeder reservoir and bale chopper are a response to the development of bigger farms and higher demands for automation, flexibility and capacity. The machine is modular and built either as a magazine or a bale chopper, in lengths up to 14,5 meters and a volume of 31m³.

MaxiFeeder & MaxiMag

Modular magazine with the possibility of a high capacity cutter module.

Overview Technical Info Accessories Gallery Case Studies

Product Overview

MaxiFeeder is a powerful and spacious bale cutter and feed distributor with high capacity and flexibility. The machine is designed for larger barns and high feed consumption, and can be delivered with electric drive and customized equipment to suit your needs.

Applications

Possible applications for MaxiFeeder.

Cutting and dispensing of round bales and silage feed
Daily feeding in larger herds
Efficient distribution of various feed types

Product Overview

MaxiMag and MaxiFeeder are modular and may be configured as a magazine or a chopper, in lengths up to 14,5 meters giving a volume of 43 m³. The system gives high flexibility, capacity and level of automation.

It can be used as a stand-alone machine or in a automated system, optimizing filling of TMR-mixer and feeding wagons.

MaxiMag

MaxiMag can be used as a magazin or feed table, controlled either manually or as part of a system. Sequence for filling makes it easy to load multiple bales into the machine.

MaxiMag

MaxiMag can be used as a magazin or feed table, controlled either manually or as part of a system. Sequence for filling makes it easy to load multiple bales into the machine.

MaxiFeeder

MaxiFeeder as bale chopper is equipped with two knife drums and 120 knives. The rotation speed is 170 rpm, making the cutting highly effective. MaxiFeeder handles most type of forage - dry or wet round bales, square bales, straw or silage. The amperage is monitored and regulated to avoid overload and shutdown. An ultrasonic sensor monitors the flow of forage and regulates the conveyor to ensure even and precise flow out of the machine.

MaxiFeeder

Modular

The Maxi concept is modular and can be customized its use and placement. The system consist of four modules: front section, mid section, rear section and cutting module. The shortest possible configuration consist of front and rear section, a length of 4,5 meter and 8 m³.

The system is extendable adding up to five sections at 2 meters each. Total length is 14,5 meters, giving a volume of 31m³.

Automatic start

The system can be started by a signal from an external machine or through an app.

Automatic start

The system can be started by a signal from an external machine or through an app.

Filling sequence

The filling sequence assists in distributing forage in the entire chamber. The conveyor is reversed until remaining forage is in the back of the machine. New forage is added and the machine moves it automatically to give space for additional forage. This is repeated until machine is full.

High capacity

MaxiFeeder is equipped with two cutting drums with a total of 120 specifically developed knives, spinning at 170 rpm. The result is high capacity and a good cut. MaxiFeeder is shaving the forage mass, rather than ripping it, and is therefore not dependent of forage rotation.

High capacity

Technical Info

Compare technical details for MaxiFeeder and MaxiMag.

MaxiMag

MaxiMag magazine and reservoir is delivered with one or two motors, depending on the length of the machine.

TECHNICAL DETAILS

MaxiMag

Length, front module	2 985 mm
Length, rear module	1 496 mm
Length, middle module	1 990 mm
Width	2 460 mm
Height	1 419 mm
Internal Width	1 960 mm
Weight (8,5m)	ca. 1 850 kg
Power (230 V)	Min. 1,4 A
Power (400 V)	Min. 0,74 A
Effect, Conveyor	0,25 kW (per motor)

MaxiFeeder

MaxiFeeder bale chopper is delivered with one or two motors for the conveyor, depending on the length of the machine. The knife drums are equipped with a total of 120 knives for high capacity and cutting capability.

Technical Details

MaxiFeeder

Length, front module	2 994 mm
Length, rear module	1496 mm
Length, middle module	1 990 mm
Width	2 533 mm
Height	2 093 mm
Internal Width	1 952 mm
Weight (8,5 meter)	ca. 1 850 kg
Power (230 V)	Min. 35 A
Power (400 V)	Min. 25 A
Effect, cutter	9,50 kW
Effect, Conveyor	0,25 kW (per motor)

Videoer

We have multiple videos showcasing the use of MaxiFeeder, check them out!

User manual

Download user manual for MaxiFeeder and MaxiMag in PDF format.

DOWNLOAD PDF

User manual

Download user manual for MaxiFeeder and MaxiMag in PDF format.

DOWNLOAD PDF

Brochure

Download brochure for MaxiFeeder and MaxiMag in PDF format.

DOWNLOAD PDF

Brochure

Download brochure for MaxiFeeder and MaxiMag in PDF format.

DOWNLOAD PDF

Ciruit diagram for MaxiFeeder

Download circuit diagram for MaxiFeeder in PDF format.

Ciruit diagram for MaxiFeeder

Download circuit diagram for MaxiFeeder in PDF format.

Circuit diagram for MaxiMag

Download circuit diagram for MaxiMag in PDF format.

Circuit diagram for MaxiMag

Download circuit diagram for MaxiMag in PDF format.

Accessories

Have a look at accessories available for MaxiFeeder and MaxiMag.

Integrated or separate feed table
Wheel set or rail suspension
Optional knives for different feed qualities
Electric or hydraulic control

Stand

The stand is made to measure. Specify height in the order.

Online package

The online package enables remote access from your mobile device, as well as the possibility for online software updates and troubleshooting.

The online package is constantly being developed and updated.

Gallery

Case Studies

See what our customers say about the MaxiFeeder and MaxiMag.

Case Studies

See what our customers say about the MaxiFeeder and MaxiMag.

MaxiFeeder at Nærbø

Endre Nærland have put the MaxiFeeder through its paces during the winter. Endre has tested how the machine handles delivering different types and combinations of forage to his belt feeding system.

MaxiFeeder at Axevalla

At Serigstad, we say “Think like a farmer.” Here’s an example of what knowledge-based operation and management can achieve.

Contact

ordre@serigstad.no

+47 46 85 46 65